Your one-rep max (1RM) is the heaviest weight you can lift for a single full repetition with good form. You don't have to max out to find it: lift a weight for 3-10 reps and use the Epley formula, 1RM = weight x (1 + reps / 30). Bench 185 lb (84 kg) for 6 reps and your estimated 1RM is about 222 lb (101 kg).
Once you know it, you can set training loads as percentages of it, which is how most strength programs are written.
Key takeaways
- 1RM is lift-specific. Your squat, bench press and deadlift each have their own number.
- Estimate instead of testing. A set of 3-10 reps plus a formula gets you close; a 5-rep max predicted best in one study.
- Use percentages: about 85% and up for heavy strength work, roughly 70-85% (6-12 reps) for muscle growth.
- Your max moves day to day. Repeat 1RM tests vary by about 4% on average.
- Re-estimate every 4-8 weeks, at the end of a training block.
What is a one-rep max (1RM)?
One-rep max is the most weight you can move through a full range of motion, once, with proper technique. It's a snapshot of your maximal strength on that exercise on that day.
It's specific to the movement. A back squat and a front squat need separate numbers, and so do a barbell and a dumbbell bench press. It's also a reliable measure: a 2020 systematic review of 1RM testing found test-retest reliability was high in almost every study, with a median variation of 4.2% between sessions.
Coaches use it for two jobs. It tracks progress in a single number, and it lets a program say "3 sets of 5 at 80%" so the same plan fits a beginner and a national-level lifter.
How to calculate your one-rep max
You need two numbers: the weight you lifted and how many clean reps you got. Take the set close to failure, stopping when your form would break down.
Epley formula
1RM = weight x (1 + reps / 30)
- 185 lb x 6 reps: 185 x 1.2 = 222 lb
- 100 kg x 5 reps: 100 x 1.167 = 116.7 kg
Brzycki formula
1RM = weight x 36 / (37 - reps)
- 185 lb x 6 reps: 185 x 36 / 31 = 215 lb
- 100 kg x 5 reps: 100 x 36 / 32 = 112.5 kg
The two match exactly at 10 reps. Below that, Epley gives the higher estimate (222 vs 215 lb in the example above), and above 10 reps Brzycki does. If you want a single number, average them, or just use the same formula every time so your progress is comparable.
How many reps give the best estimate?
Fewer reps are more accurate. In a study of 70 adults aged 18-69 in the Journal of Strength and Conditioning Research, 5-rep-max tests predicted bench press and leg press 1RM better than 10- or 20-rep tests. The authors concluded no more than 10 reps should go into this kind of formula. Sets of 3-6 reps are the sweet spot if you can do them safely.
The one-rep max calculator does the math for you and shows a full percentage table.
One-rep max percentage chart
How heavy a weight you can lift for a given number of reps, as a percentage of 1RM, according to each formula.
| Reps to failure | Epley (% of 1RM) | Brzycki (% of 1RM) | Example: 1RM 225 lb (102 kg), Brzycki load |
|---|---|---|---|
| 1 | 100 | 100 | 225 lb (102 kg) |
| 2 | 93.8 | 97.2 | 219 lb (99 kg) |
| 3 | 90.9 | 94.4 | 212 lb (96 kg) |
| 4 | 88.2 | 91.7 | 206 lb (94 kg) |
| 5 | 85.7 | 88.9 | 200 lb (91 kg) |
| 6 | 83.3 | 86.1 | 194 lb (88 kg) |
| 8 | 78.9 | 80.6 | 181 lb (82 kg) |
| 10 | 75.0 | 75.0 | 169 lb (77 kg) |
| 12 | 71.4 | 69.4 | 156 lb (71 kg) |
Real lifters vary. People with more endurance-type muscle can do more reps at a given percentage, and the relationship differs between exercises, so treat the chart as a starting point and adjust from how sets actually feel.
How to use your 1RM in training
The American College of Sports Medicine's position stand on resistance training gives these loading ranges. RM means repetition maximum: a 6RM load is one you can lift six times, not seven.
| Goal | Load | Approx. % of 1RM | Rest between sets |
|---|---|---|---|
| Novice, general strength | 8-12RM | about 70-80% | not specified |
| Maximal strength (intermediate and advanced) | 1-12RM, emphasis on 1-6RM | about 85-100% | 3-5 min |
| Muscle growth (hypertrophy) | 1-12RM, emphasis on 6-12RM | about 70-85% | 1-2 min |
| Local muscular endurance | 40-60% of 1RM for more than 15 reps | 40-60% | under 90 s |
| Power | 0-60% (lower body) or 30-60% (upper body), lifted fast | 30-60% | 3-5 min |
The percentage column is converted from RM loads with the chart above. ACSM also says to add 2-10% to the load once you can do one or two reps more than your target.
A simple 5-week example
A lifter with a 315 lb (143 kg) squat, building toward a re-test. Loads are rounded to the nearest 5 lb.
| Week | % of 1RM | Load | Sets x reps |
|---|---|---|---|
| 1 | 65% | 205 lb (93 kg) | 4 x 8 |
| 2 | 70% | 220 lb (100 kg) | 4 x 6 |
| 3 | 75% | 235 lb (107 kg) | 4 x 5 |
| 4 | 80% | 250 lb (113 kg) | 5 x 3 |
| 5 | 85% | 270 lb (122 kg) | 4 x 2, then re-estimate |
Strength work goes further when you're eating enough. If you're trying to lose fat while lifting, body recomposition explains how to set it up, how much protein you need for recomp covers the protein side, and the protein calculator gives you a daily target.
How to test your 1RM safely
If you do want a true max, for a meet or just to know, do it fresh, after a few easier days, and with a spotter or safety pins.
- Warm up with general movement, then about 50% of your expected max for 5-10 reps.
- Rest a couple of minutes, then do about 3 reps at roughly 80%.
- Rest 3-5 minutes, then do a single at about 90%.
- Attempt your expected max. If it moves well, rest 3-5 minutes and add 2-5%.
- Stop at the first rep where form breaks down. Your last clean lift is your 1RM.
Keep the jumps small near the top; most of the injury risk comes from a grinding rep with bad position. Overhead pressing and Olympic lifts are harder to fail safely without coaching.
Beginners usually don't need a true max. In the first months, adding a little weight each session does the job, and technique isn't stable enough for all-out singles yet.
How often should you test your 1RM?
Re-estimate from a rep-max set every 4-8 weeks, typically at the end of a training block or after a deload. Many coaches save true max attempts for once or twice a year per lift.
Signs it's time sooner:
- Your planned sets feel easy and you're beating the target reps.
- You've had time off and your old numbers are too heavy.
- You've lost or gained a meaningful amount of body weight.
A single bad day doesn't mean you got weaker. Sleep, food and stress all move your max a little, which is why a 4% swing between tests is normal.
If your goal is fat loss rather than pure strength, cardio vs strength training for fat loss shows how lifting fits in, how many calories squats burn puts numbers on a leg day, and these post-workout snacks help you recover.
Sources
- American College of Sports Medicine. Position stand: progression models in resistance training for healthy adults. Med Sci Sports Exerc. 2009;41(3):687-708.
- Reynolds JM, Gordon TJ, Robergs RA. Prediction of one repetition maximum strength from multiple repetition maximum testing and anthropometry. J Strength Cond Res. 2006;20(3):584-592.
- Grgic J et al. Test-retest reliability of the one-repetition maximum (1RM) strength assessment: a systematic review. Sports Med Open. 2020;6:31.
- Epley B. Poundage Chart. Boyd Epley Workout, 1985 (Epley formula).
- Brzycki M. Strength testing: predicting a one-rep max from reps-to-fatigue. J Phys Educ Recreat Dance. 1993;64(1):88-90 (Brzycki formula).
- Healthline, One-rep max: how to calculate and use it (testing steps).
- Legion Athletics, What is a one-rep max and how do you find yours? (testing frequency).



